Dec. 2nd, 2021

jae_builds: (Default)
This stage was very reminiscent of 1.2.6, which makes sense given that I was building the cabins that align with the cabins I built in that stage. This felt faster; I'm not sure if that's because I had a chance to practice it back then, or if the simpler side of the grand staircase on this section actually saved a bunch of time, or both. But before we get to that, here's the mise-en-place.
The mise-en-place for this section. Just one small piece plate, but it`s packed full of tiles and other detail elements.

I started with the other half of the pool and a cabin, then added two more third class cabins on the next level.
On the left side of the build is a pool with a green and white checkered tile floor surrounding it. On the right is a third class cabin with blue tiles for the floor.
The previous level has been topped with two more similar third class cabins.

The it was time for a trivia break.
"The ship was equipped with her own waterworks, capable of heating and pumping water to all parts of the vessel."

As I built the next floor, I noticed this curved piece and was wondering why it was there, given that it will definitely not be visible in the finished build...
A detail shot of the scaffolding behind the eventually-visible part of the build. Running down the center of the build is a stack of blocks and plates, and on this section, near the back of the stack behind a red brick, is a dark grey 2x2 block with two studs in the back and a curved front. The block is slightly shorter than a standard block, such that the two studs are a plate lower than the rest of the stack at this level.
...until it became abundantly clear that it was because the curved block is slightly shorter than the surrounding blocks, to create a level for this cross-beam to sit on.
A wider shot, in which a long plate has been laid across the build, perpendicular to the stack, on top of the curved block, so that it is even with the height of the stack. At the front of the build you can see a level-in-progress with red tiled floors.

There is a similar curved block on a lower level; I didn't get a great picture of it, but you can see it two levels below the top one next to the other red brick in the detail shot above. That one has a cross-bar sitting underneath it, again to keep everything level. I'm curious how the color of internal blocks like these are chosen. Why are those two blocks red, and not blue or yellow? Sure, they have to be some color, but is it genuinely random, or are the designers thinking about the aesthetics of the parts of the build that will be hidden when it's done. I know it doesn't really matter, but it's a thing I wonder about.

Anyway, I wrapped up the lobby level, and then added the base of the next level up.
The level from the wider shot has been turned into a lobby level, similar to the one from 1.2.6.
The build has been topped with another level, this time with red tiled floors and no attachment points for more detail except for a row of brown studs near the back.
I'm not sure what this next level is going to end up being; it's interesting that there are no attachment points for furniture or other details except along the back row.

Here's a completed shot with the levels lit to be visible.
A face on shot of the completed build, looking into the rooms I just built on each level.

Thanks as always for reading.

Trying a new thing for the discussion prompt this time: What do you think this next level is going to be? No fair peeking ahead in the build instructions!

Profile

jae_builds: (Default)
jae_builds

February 2022

S M T W T F S
  12345
6789101112
13 141516171819
20212223242526
2728     

Style Credit

Expand Cut Tags

No cut tags
Page generated Apr. 8th, 2026 01:34 am
Powered by Dreamwidth Studios